Stabilization/Solidification of Strontium Using Magnesium Silicate Hydrate Cement

Magnesium silicate hydrate (M–S–H) cement, formed by reacting MgO, SiO2, and H2O, was used to encapsulate strontium (Sr) radionuclide. Samples were prepared using light-burned magnesium oxide and silica fume, with sodium hexametaphosphate added to the mix water as a dispersant. The performance of the materials formed was evaluated by leach testing and the microstructure of the samples was also characterized. The stabilizing/solidifying effect on Sr radionuclide in the MgO–SiO2–H2O system with low alkalinity is demonstrated in the study. The leaching rate in a standard 42-day test was 2.53 × 10−4 cm/d, and the cumulative 42-day leaching fraction was 0.06 cm. This meets the relevant national standard performance for leaching requirements. Sr2+ was effectively incorporated into the M–S–H hydration products and new phase formation resulted in low Sr leaching being observed.