Influence of buoyancy, capillary, and viscous forces on three-dimensional pore scale fingering structure of immiscible two-phase flow in a porous medium
The understanding of immiscible flow displacement through porous media has cardinal influences in many fields, such as enhancing oil production and sequestration of CO2 to minimize global warming effect. During injection of supercritical CO2 into aquifers saturated with brine or depleted oil reservoir, only a part of CO2 would be trapped for a long period of time in porous media causing inefficiency of available storage capacities. Furthermore, displacing oil by water flooding to enhance oil production is also limited by unstable displacement. This results in only a half of trapped oil that could be extracted from the reservoir. These problems are caused by fingering phenomena that is the instability pattern in the displacement of two fluids. In this study, we conducted experiments using two fluid pairs and several injection rates to investigate and to evaluate the fingering phenomena. A porous medium made from synthetic acrylic tube filled with cylindrical glass beads was initially saturated by a displaced fluid. Following that, another fluid was injected to generate the displacement process between two fluids. The three-dimensional fingering structure has been obtained at a pore scale by implementing X-ray CT scan. In the case of capillary fingering with the consideration of gravity, at low Bond number (Bo), the non-wetting phase saturation increased with higher Capillary number (Ca). However, at large number of Bo, the saturation did not elevate with more Ca because the buoyancy was dominant over capillary and viscous forces. In the absence of gravity, with the increase of Ca, viscous force became more dominant and transition from capillary to viscous fingering occurred. However, when viscous fingering was observed, the wetting phase saturation tended to be constantly low.