光纤激光器
光学
亮度
激光功率缩放
材料科学
激光器
激光束质量
包层(金属加工)
光纤
光电子学
物理
激光束
冶金
作者
Li Wang,Hanwei Zhang,Peng Wang,Baolai Yang,Xiaolin Wang,Ning Yu,Xiaojun Xu
出处
期刊:IEEE Photonics Journal
[Institute of Electrical and Electronics Engineers]
日期:2022-05-10
卷期号:14 (3): 1-6
被引量:11
标识
DOI:10.1109/jphot.2022.3173992
摘要
The main factors limiting the power scaling of high-peak-power high-brightness quasi-continuous wave (QCW) fiber laser oscillator and a possible solution are analyzed in this paper. The impacts of fiber length and grating parameters on the output power are studied by rate equations. Under the optimized parameters, a high-brightness QCW fiber laser oscillator with a peak power of 7.3 kW is presented experimentally by using a 24 meter long spindle-shaped Yb-doped fiber with a constant core cladding ratio, and that is the best performance of peak power and brightness in near-single-mode QCW fiber lasers at present to the best of our knowledge. The corresponding pulse energy is 0.57 J and the beam qualityM2factor is about 1.43 under the condition of repetition frequency of 1 kHz and pulse width of 100 μs. The details are analyzed, and also the limiting factors of further power scaling, strategies of suppressing nonlinear effects and the principle of optical device parameter optimization.
科研通智能强力驱动
Strongly Powered by AbleSci AI