电解质
材料科学
金属锂
化学工程
接口(物质)
锂(药物)
固态
膜
电极
金属
纳米技术
工程物理
复合材料
化学
冶金
心理学
精神科
毛细管作用
工程类
物理化学
生物化学
毛细管数
作者
Taoli Jiang,Pingge He,Yuhao Liang,Li‐Zhen Fan
标识
DOI:10.1016/j.cej.2021.129965
摘要
Sulfide solid electrolytes have attracted much attention for next generation lithium batteries due to their high ionic conductivity and low grain boundary impedance. However, they generally suffer poor processability into a thin membrane applied in high energy–density batteries and usually unstable with some organic solvents and moistures. Furthermore, the huge interfacial resistance, originated from the side reactions at electrode/electrolyte interfaces, deteriorates the electrochemical performance of batteries. Here, we develop a thin (~100 μm) Li10GeP2S12 (LGPS) membrane composed by trace polytetrafluoroethylene (PTFE) binder with LGPS powders through all-dry grinding method and reinforced with a nylon mesh. Thin LGPS can not only reduce the cost, but also improve the energy density of the battery. Moreover, the interface stability between the LGPS electrolyte and electrodes has been significantly enhanced by employing an in-situ gel polymerized electrolyte (GPE) on lithium metal anode, and coating LiNbO3 on LiNi0.5Mn0.3Co0.2O2 ([email protected]) separately. As a result, the prepared [email protected]|C-LGPS|GPE|Li batteries reveal satisfying discharge specific capacities and good cyclic stabilities at room temperature.
科研通智能强力驱动
Strongly Powered by AbleSci AI