锡
材料科学
阴极
化学工程
多硫化物
碳纤维
氮化钛
兴奋剂
吸附
电化学
纳米颗粒
纳米技术
氮化物
复合材料
冶金
电极
电解质
图层(电子)
光电子学
有机化学
复合数
物理化学
化学
工程类
作者
Zhenyu Xing,Gaoran Li,Serubbabel Sy,Zhongwei Chen
出处
期刊:Nano Energy
[Elsevier BV]
日期:2018-09-17
卷期号:54: 1-9
被引量:114
标识
DOI:10.1016/j.nanoen.2018.09.034
摘要
In this work, we put forward a novel cathode host for Li-S batteries by loading titanium nitride (TiN) nanoparticles into the pores of N-doped carbon as a proof-of-concept. The selection of TiN arises from its strong binding ability with polysulfide and its exceptionally high conductivity of 5 × 106 S/m. As for N-doped porous carbon, it provides necessary physical adsorption and extra chemical adsorption sites from the N-doping. Besides the above advantages, the most substantial merit endowed to this structure is the pore-loaded TiN design. The carbon pore size confines the TiN precursors to the nanoscale and prevents otherwise subsequent agglomeration of TiN nanoparticles. Moreover, the pore-loaded TiN design, with fully exposed adsorptive surface and highly dispersed adsorptive sites, guards against the blocking of future sulfur infiltration and Li+ diffusion. The advantages of the TiN loaded N-doped carbon are finally confirmed by electrochemical evaluations. The capacity is found up to be 1338 mAh/g at a current density of 0.2 C and 690 mAh/g at a current density of 5 C (where 1 C = 1672 mAh/g). For durability evaluations, the capacity is maintained at 700 mAh/g after 800 cycles with a mere decay of 0.04% per cycle. Lastly, the feasibility of a high mass loading with 7 mg/cm2 is demonstrated.
科研通智能强力驱动
Strongly Powered by AbleSci AI