Effect of Process Parameters on Distortion and Residual Stress in High-Pressure Die Cast AZ91D Components After Clean Blasting and Painting

Abstract A high-pressure die-casting process was employed to produce AZ91D components. These cast components were exposed to three different post-treatments: (1) clean blasting, (2) clean blasting and painting, and (3) painting (without clean blasting). The influence of the process parameters first phase injection speed, temperature of fixed half of the die, cooling time, and intensification pressure on distortion and residual stress of the components after each post-treatment were investigated. The results showed that intensification pressure was the most significant factor among the four parameters.