材料科学
光电子学
碲化镉光电
热的
蒸发
基质(水族馆)
退火(玻璃)
吸收(声学)
沉积(地质)
真空沉积
纳米技术
真空蒸发
能源消耗
数码产品
半导体
薄膜
光子
热能
发光二极管
作者
Elisa Artegiani,Gasparotto, Andrea,Mukhtar, Mariyam,Simya Olavil Karayi,Narges Torabi,Ikram Anefnaf,Alessandro Romeo
标识
DOI:10.4229/eupvsec2023/2do.6.2
摘要
Introducing a CdSeTe compound at the junction of CdTe-based devices enhances photons absorption across a broad spectrum of short and long wavelengths. CdSeTe/CdTe devices can be fabricated by sequentially depositing a CdSe and a CdTe layer. A crucial aspect of these devices is the intermixing of the layers, where they must combine to create the desired CdSexTe1-x compound at the junction by completely consuming the CdSe. In this paper we investigate different strategies to fabricate CdSeTe/CdTe devices by sequential evaporation of a CdSe and a CdTe layer, coupled with the introduction of vacuum or air annealing either between or after the deposition of the layers. The samples have been fabricated by low substrate temperature (LST) thermal evaporation, method that reduces energy consumption and enables the possibility to use flexible substrates. Furthermore, we have reduced the absorber thickness to 2 µm, which is half the usual thickness, aiming to minimize the materials impact in terms of cost, pollution and availability. Despite the reduction in absorber thickness, the devices exhibit remarkable current densities exceeding 28 mA/cm2 and have achieved efficiencies approaching 15 %, setting a new record for such a thin CdTe cell produced by LST method.
科研通智能强力驱动
Strongly Powered by AbleSci AI