Bending moment resistances of L-shaped furniture frame joints under tension and compression loadings.

Effect of wood species, joint techniques, and adhesive type on bending moment resistances were investigated.480 L-shaped joint specimens were tested including 2 loadings, 4 wood species, 3 joint techniques, 2 adhesives, and 10 replications.Specimens were prepared from Scotch pine, Oriental beech, oak, and chestnut.The joint techniques were dowel, half lap and open mortise and tenon, and type of adhesives were polyvinyl acetate (PVAc) and polyurethane (PU).Bending moment resistance of the joints under compression ranged from a low of 60 Nm for Scotch pine dowel joints with PVAc to oak half lap joints a high of 281 N .m w/PVAc.Bending moment resistance of the joints loaded in tension ranged from a low of 230 N .m for scotch pine dowel joints w/PVAc and to a maximum of 917 N .m for oak half lap joints w/PVAc.Highest average moment resistance was achieved with oak half lap jointed specimens w/PVAc, under both loadings.