尖晶石
材料科学
硝酸锂
锂(药物)
钛酸锂
锂离子电池
阳极
微观结构
水溶液
溶胶凝胶
相(物质)
共沉淀
色散(光学)
介孔材料
化学工程
无机化学
电极
离子
电池(电)
冶金
化学
纳米技术
催化作用
物理化学
内分泌学
工程类
有机化学
功率(物理)
物理
光学
医学
量子力学
生物化学
离子键合
作者
И. В. Мацукевич,Anatoly I. Kulak,Volga Palkhouskaya,Valentin Romanovski,Jae Hyeon Jo,Yauhen Aniskevich,Saad Gomaa Mohamed
摘要
Abstract BACKGROUND Mesoporous powders of lithium titanates Li2MTi3O8 (M – Co, Cu, Zn) of spinel structure are promising as anode materials for Li‐ion batteries. RESULTS Li2MTi3O8 (M – Co, Cu, Zn) were obtained by the sol–gel method, using self‐propagating high‐temperature synthesis (SHS) from glycine–citrate–nitrate mixtures, and also by the SHS method from aqueous solutions. The crystal structure, phase composition, microstructure and dispersion of the obtained materials were studied. CONCLUSION It was established that the SHS method for the synthesis of lithium titanates has several advantages compared with the sol–gel method, including not requiring solvents, reduced aggregation of particles, a higher specific surface area and low bulk density of the obtained powders. The electrode obtained on the basis of Zn‐containing Li titanate by the SHS method from glycine–citrate–nitrate mixtures showed the highest charging capacity of 160 mAh g−1 and high cyclic stability. © 2021 Society of Chemical Industry (SCI).
科研通智能强力驱动
Strongly Powered by AbleSci AI