热能储存
相变材料
材料科学
工艺工程
储能
潜热
相变
可再生能源
传热
强化传热
乳状液
过冷
环境科学
化学工程
热力学
功率(物理)
工程物理
传热系数
工程类
电气工程
物理
作者
Liu Liu,Jianlei Niu,Jian‐Yong Wu
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2021-12-24
卷期号:15 (1): 121-121
被引量:33
摘要
Thermal energy storage (TES) is an important means for the conservation and efficient utilization of excessive and renewable energy. With a much higher thermal storage capacity, latent heat storage (LHS) may be more efficient than sensible heat storage. Phase change materials (PCMs) are the essential storage media for LHS. PCM emulsions have been developed for LHS in flow systems, which act as both heat transfer and thermal storage media with enhanced heat transfer, low pumping power, and high thermal storage capacity. However, two major barriers to the application of PCM emulsions are their instability and high degree of supercooling. To overcome these, various strategies have been attempted, such as the reduction of emulsion droplet size, addition of nucleating agents, and optimization of the formulation. To the best of our knowledge, however, there is still a lack of review articles on fabrication methods for PCM emulsions or their latest applications. This review was to provide an up-to-date and comprehensive summary on the effective strategies and the underlying mechanisms for the preparation of stable PCM emulsions and reduction of supercooling, especially with the organic PCMs of paraffin. It was also to share our insightful perspectives on further development and potential applications of PCM emulsions for efficient energy storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI