材料科学
微观结构
马氏体时效钢
复合数
复合材料
极限抗拉强度
润湿
粉末冶金
烧结
冶金
作者
Farid Akhtar,Shengfeng Guo,Peizhong Feng,S KHADIJAHALI,A SYEDJAVID
出处
期刊:Rare Metals
[Springer Science+Business Media]
日期:2006-12-01
卷期号:25 (6): 630-635
被引量:11
标识
DOI:10.1016/s1001-0521(07)60004-7
摘要
Particulate TiC reinforced 17-4PH and 465 maraging stainless steel matrix composites were processed by conventional powder metallurgy (P/M). TiC-maraging stainless steel composites with theoretical density >97% were produced using conventional P/M. The microstructure, and mechanical and wear properties of the composites were evaluated. The microstructure of the composites consisted of (core-rim structure) spherical and semi-spherical TiC particles depending on the wettability of the matrix with TiC particles. In TiC-maraging stainless steel composites, 465 stainless steel binder phase showed good wettability with TiC particles. Some microcracks appeared in the composites, indicating the presence of tensile stresses in the composites produced during sintering. The typical properties, hardness, and bend strength were reported for the composites. After heat treatment and aging, an increase in hardness was observed. The increase in hardness was attributed to the aging reaction in maraging stainless steel. The specific wear behavior of the composites strongly depends on the content of TiC particles and their interparticle spacing, and on the heat treatment of the maraging stainless steel.
科研通智能强力驱动
Strongly Powered by AbleSci AI