Varying precipitation conditions allow directing the composition and physical properties of soy protein concentrates

Abstract Soy protein concentrates (SPCs) are common food ingredients. They typically contain 65% (w/w) protein and ∼30% (w/w) carbohydrate. SPCs can be obtained with various protein precipitation conditions. A systematic study of the impact of these different protein precipitation protocols on the SPC protein composition and physical properties is still lacking. Here, SPCs were prepared via three different protocols, that is, isoelectric (pH 3.5–5.5), aqueous ethanol (50%–70% [v/v]), and Ca 2+ ion (5–50 mM) based precipitations, and analyzed for (protein) composition, protein thermal properties, dispersibility, and water‐holding capacity. SPCs precipitated at pH 5.5 or by adding 15 mM Ca 2+ ions had a lower 7S/11S globulin ratio (∼0.40) than that (∼0.50) of all other SPC samples. Protein in SPCs obtained by isoelectric precipitation denatured at a significantly higher temperature than those in ethanol‐ or Ca 2+ ‐precipitated SPCs. Precipitation with 50%–60% (v/v) ethanol resulted in pronounced denaturation of 2S albumin and 7S globulin fractions in SPCs. Additionally, increasing the precipitation pH from 3.5 to 5.5 and increasing the Ca 2+ ion concentration from 15 to 50 mM caused a strong decrease of both the dispersibility of the protein in SPC and its water‐holding capacity at pH 7.0. In conclusion, this study demonstrates that the SPC production process can be directed to obtain ingredients with versatile protein physicochemical properties toward potential food applications. Practical Application This study demonstrates that applying different protein precipitation protocols allows obtaining SPCs that vary widely in (protein) composition and physical properties (such as protein dispersibility and water‐holding capacity). These varying traits can greatly influence the suitability of SPCs as functional ingredients for specific applications, such as the production of food foams, emulsions, gels, and plant‐based meat alternatives. The generated knowledge may allow targeted production of SPCs for specific applications.