Sufficient extraction of Cr from chromium ore processing residue (COPR) by selective Mg removal

Chromium ore processing residue (COPR) is a hazardous waste generated during the production of chromate. Currently, approximately 10% of Cr2O3 cannot be extracted after chromite sodium roasting and remains in COPR, wasting valuable Cr resources. In this study, Mg was selectively removed by using (NH4)2SO4 roasting in combination with H2SO4 leaching. The results showed that the selective removal of 79.55% Mg from COPR could be achieved under the optimum (NH4)2SO4 roasting conditions (80 mmol (NH4)2SO4, 800 °C, 2 h). During the subsequent sodium roasting and acid leaching stages, the Cr extraction rate was 84.63% for the COPR direct roasting and 95.39% for the Mg removal residue roasting. The increased Cr extraction efficiency is attributed to the transformation of Mg-rich spinel and diopside (the Mg & Cr coexisting phases) in COPR converted into easily extractable (Fe,Cr)2O3 and Cr2O3 after the Mg treatment. This study investigated that the phase transformation of the Cr host phases is crucial for the sufficient extraction of Cr and provides inspiration for the development of efficient and practical Cr extraction techniques. Moreover, the method can be extended to the effective extraction of Cr from other Cr-containing wastes.