材料科学
断裂韧性
无定形固体
复合材料
韧性
电荷(物理)
无定形二氧化硅
断裂(地质)
法律工程学
化学工程
结晶学
量子力学
物理
工程类
化学
作者
Wataru Matsunaga,Seiya Shichino,Takumi Takahashi,Takahiro Shimada,Hiroyuki HIRAKATA
标识
DOI:10.1016/j.scriptamat.2024.116375
摘要
In this study, we demonstrate that the fracture toughness of amorphous silica, an electrical insulator, can be dramatically increased and restored via injecting and removing the electrical charge content. Micropillar specimens of amorphous silica were fabricated using focused ion beam machining. The specimens were charged by electron-beam irradiation (charged specimens), and the charge was removed from the specimens by exposure to atmospheric conditions and annealing (charge-removed specimens). Fracture toughness testing was conducted on non-charged, charged, and charge-removed micropillar specimens. The fracture toughness of the charged specimen was 2.4 times higher than that of the non-charged specimens. Furthermore, the fracture toughness of the charge-removed specimens was restored to a level similar to that of the non-charged specimens, but not completely restored. These results indicate that the fracture toughness of amorphous silica can be controlled by injecting and removing electrostatic charges.
科研通智能强力驱动
Strongly Powered by AbleSci AI