摘要
The microelectronics industry supplies vital components to the electronics industry and to the U.S. economy, enabling rapid improvements in productivity and in new high technology growth industries such as electronic commerce and biotechnology.The National Institute of Standards and Technology, NIST, in fulfilling its mission of strengthening the U.S. economy, works with industry to develop and apply technology, measurements and standards and applies substantial efforts on behalf of the semiconductor industry and its infrastructure.This report describes the many projects being conducted at NIST that constitute that effort. HiStorical PerSPectiveNIST's predecessor, the National Bureau of Standards (NBS), began work in the mid-1950s to meet the measurement needs of the infant semiconductor industry.While this was initially focused on transistor applications in other government agencies, in the early 1960s the Bureau sought industry guidance from the American Society for Testing and Materials (ASTM) and the U.S. Electronic Industries Association (EIA).ASTM's top priority was the accurate measurement of silicon resistivity.NBS scientists developed a practical nondestructive method ten times more precise than previous destructive methods.The method is the basis for five industrial standards and for resistivity standard reference materials widely used to calibrate the industry's measurement instruments.The second project, recommended by a panel of EIA experts, addressed the "second breakdown" failure mechanism of transistors.The results of this project have been widely applied, including solving a problem in main engine control responsible for delaying the launch of a space shuttle.From these beginnings, by 1980 the semiconductor metrology program had grown to employ a staff of 60 with a $6 million budget, mostly from a variety of other government agencies.Congressional funding in that year gave NBS the internal means to maintain its semiconductor metrology work.Meeting industrial needs remained the most important guide for managing the program.induStrial metrology needS By the late 1980s, NBS (now NIST) recognized that the semiconductor industry was applying a much wider range of science and engineering technology than the existing NIST program was designed to cover.The necessary expertise existed at NIST, but in other parts of the organization.In 1991, NIST established the Office of Microelectronics Programs (OMP) to coordinate and fund metrological research and development across the agency, and to provide the industry with easy single point access to NIST's widespread projects.Roadmaps developed by the U.S. Semiconductor Industry Association (SIA) have independently identified the broad technological coverage and growing industrial needs for NIST's semiconductor metrology developments.As the available funding and the scope of the activities grew, the collective name became the National Semiconductor Metrology Program (NSMP), operated by the OMP.The NSMP has stimulated a greater interest in semiconductor metrology, motivating most of NIST's laboratories to launch additional projects of their own and to cost-share OMP-funded projects.The projects described in this book represent this broader portfolio of microelectronics projects.Most, but not all, of the projects described are partially funded by the NSMP, which is providing a $12 million budget in fiscal year 2008. FoStering niSt'S relationSHiPS WitH tHe induStryBy the late 1980s, NBS (now NIST) recognized that the semiconductor industry was applying a much wider range of science and engineering technology than the existing NIST program was designed to cover.The necessary expertise existed at NIST, but in other parts of the organization.In 1991, NIST established the Office of Microelectronics Programs (OMP) to coordinate and fund metrological research and development across the agency, and to provide the industry with easy single point access to NIST's widespread projects.Roadmaps developed by the U.S. Semiconductor Industry Association v Semiconductor Microelectronics and Nanoelectronics Programs v Welcome and introduction (SIA) have independently identified the broad technological coverage and growing industrial needs for NIST's semiconductor metrology developments.As the available funding and the scope of the activities grew, the collective name became the National Semiconductor Metrology Program (NSMP), operated by the OMP.The NSMP has stimulated a greater interest in semiconductor metrology, motivating most of NIST's laboratories to launch additional projects of their own and to cost-share OMP-funded projects.The projects described in this book represent this broader portfolio of microelectronics projects.Most, but not all, of the projects described are partially funded by the NSMP, which is providing a $12 million budget in fiscal year 2009.Additionally, in 2007, the US Congress added approximately $3M to OMP's budget to be used in support of external work on beyond CMOS.Beyond CMOS is a term that describes the search for a new switch to replace the presently available CMOS switch which is reaching the limit of its useful life.This money has been granted to the Nanotechnology Research Initiative (NRI) which is a subsidiary of the Semiconductor Research Corporation (SRC).FoStering niSt'S relationSHiPS WitH tHe induStry NIST's relationships with the SIA, SEMATECH and its subsidiary, International SEMATECH Manufacturing Initiative (ISMI), and the Semiconductor Research Corporation (SRC) are also coordinated through the OMP.Staff from OMP and NIST Laboratories represents NIST on the SIA committees that develop the International Technology Roadmap for Semiconductors (ITRS), as well as on numerous SRC Technical Advisory Boards.NIST staff is also active in the International National Electronics Manufacturers Initiative (iNEMI), the EIA, the International Organization for Standardization (ISO), and Semiconductor Equipment and Materials International (SEMI).NIST supports the United States National Committee Technical Advisory Group for the International Electrotechnical Commission Technical Committee TC113 on Nanotechnology Standardization for Electrical and Electronic Products and Systems (Technical Advisor, USNC TAG for IEC TC 113 on nanotechnology) by funding the Technical Advisor to that organization. learn more about Semiconductor metrology at niStThis publication provides summaries of NIST's metrology projects for the silicon semiconductor industry and their suppliers of materials and manufacturing equipment.Each project responds to one or more metrology requirements identified by the industry in sources such as the ITRS.NIST is committed to listening to the needs of industry, working with industry representatives to establish priorities, and responding where resources permit with effective measurement technology and services.For further information, please contact