催化作用
电解质
无机化学
电合成
氨生产
电化学
氨
化学
法拉第效率
双金属片
吸附
离解(化学)
化学工程
可逆氢电极
电催化剂
硝酸盐
选择性催化还原
制氢
氢
材料科学
选择性
键能
电极
色散(光学)
协同催化
强电解质
过渡金属
作者
Ke Lin,Li Xing,Yanfang Gao,Lei Song,Wei Liu,Rui Cao
标识
DOI:10.1021/acssuschemeng.6c06287
摘要
Abstract Developing effective electrocatalysts that can convert low-concentration nitrate (NO3–) into ammonia (NH3) in dilute electrolytes remains a major challenge. In this work, high-performance atomically dispersed CuCo catalysts (CuCo-ADCs) were prepared using a hydrothermal route. When tested in electrolyte containing 50 ppm NO3–-N and 5 mM K2SO4 (supporting electrolyte), the catalyst delivered a high NH3 Faradaic efficiency (FE) of 92.15%, ammonia selectivity of 96.33%, and NH3 production rate of 281.28 μg h–1 cm–2 at –0.6 V vs reversible hydrogen electrode (RHE). Electrochemical measurements indicated reduced solution diffusion resistance for this catalyst. After 10 h of continuous operation, more than 85% of the initial catalytic activity could be retained. Mechanistic characterizations suggested that the atomic-level dispersion accelerated reaction kinetics and suppressed the competing hydrogen evolution reaction. Such improvement originated from the optimized *NO3 adsorption and decreased N═O bond dissociation energy through bimetallic synergy. Within this catalytic system, Cu drove the nitrate reduction reaction, Co was responsible for key bond cleavage, and Ni promoted hydrogenation steps as well as product desorption. This study offers alternative design ideas for atomically dispersed catalysts intended for resource recovery from low-concentration nitrate-rich wastewater. The present catalytic system may be applied for simultaneous nitrogen removal and ammonia generation in practical wastewater treatment.
科研通智能强力驱动
Strongly Powered by AbleSci AI