共发射极
阳极
场电子发射
材料科学
电场
电流(流体)
电力航天器推进
光电子学
电流密度
离子流
电压
功率(物理)
离子
推力
推进
领域(数学)
阴极
电气工程
光学
电弧
原子物理学
电位
作者
Kyung Heon Kim,Dong Kee Sohn,Kyun Ho Lee,Jungwon Kuk,Han Seo Ko
出处
期刊:Aerospace
[Multidisciplinary Digital Publishing Institute]
日期:2026-08-09
卷期号:13 (8): 714-714
标识
DOI:10.3390/aerospace13080714
摘要
Since the thrust of a single-emitter Field Emission Electric Propulsion (FEEP) thruster is limited to 1–20 µN, a multi-emitter configuration is necessary to increase the thrust capacity. This study proposes a hybrid multi-emitter configuration designed to achieve uniform current distribution, enhanced thrust, and high efficiency. The design consists of linearly arrayed hybrid emitters, dummy emitters, and a slit extractor. Preliminary experiments investigated Taylor cone formation and ion emission characteristics. Capillary emitters exhibited pulse, oscillating, and continuous emission modes depending on the power supply method, whereas hybrid emitters exhibited only continuous emission with well-confined Taylor cone formation and consistent current–voltage characteristics. Key design requirements for the hybrid multi-emitter configuration include axially aligned electric field distribution and a large extractor hole diameter. The proposed configuration generates the required electric field distribution with the aid of dummy emitters, achieving uniform current emission across the emitter array. The calculated maximum thrust and emitter power-to-thrust ratio were 279.0 µN and 160.4 mW/µN, respectively, at an emitter current of 2.86 mA. These results demonstrate the potential of the proposed hybrid multi-emitter configuration as a scalable emitter architecture for FEEP thruster applications requiring uniform ion emission and increased thrust capacity.
科研通智能强力驱动
Strongly Powered by AbleSci AI