催化作用
化学
分解
臭氧
碳氢化合物
非阻塞I/O
氧化物
无机化学
过渡金属
丁烷
氧气
化学分解过程
金属
化学分解
反应速率
有机化学
作者
Dmitriy Andreevich Bokarev,I. V. Paramoshin,Sergey A. Kanaev,A. Yu. Stakheev
标识
DOI:10.1134/s0023158423050026
摘要
Abstract The activity of transition metal (V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) oxides supported on γ-Al2O3 in the reaction of ozone decomposition was studied. The catalytic characteristics of the samples with high (NiO/Al2O3), low (Cr2O3/Al2O3), and intermediate (MnOx/Al2O3) activity in ozone decomposition were studied in the process of ozone catalytic oxidation (OZCO) of n-butane. The results obtained allowed us to conclude that the optimal activity of a transition metal oxide in the decomposition of O3 is of key importance in the OZCO process. At a low rate of ozone decomposition, hydrocarbon oxidation is limited by the rate of formation of atomic oxygen species; at an excessively high rate of decomposition, hydrocarbon conversion decreases due to an competitive process of atomic oxygen recombination. The best catalytic performance in the oxidation of n-C4H10 was observed for a catalyst based on Mn oxide, which has an optimal activity in the decomposition of O3.
科研通智能强力驱动
Strongly Powered by AbleSci AI