Evaluation of a single‐use disk stack centrifuge for improved efficiency and sustainability at 1000 L GMP manufacturing scale

Direct depth filtration is an established technology for single-use harvest operation. Advantages of direct depth filtration include familiarity with depth filtration in downstream processes and simplicity of the operation. Drawbacks include low capacity, large footprint, labor-intensive set-up, high water use, and high waste in the form of discarded filters. Single-use centrifugation is emerging as an alternative to depth filtration for the single-use harvest step. Within the single-use centrifugation space, disc stack centrifugation represents the newest entrant. In this study, we evaluated the performance of the GEA kytero single-use disc stack centrifuge to clarify two monoclonal antibody-producing cell culture fluids. The separation performance of the GEA kytero centrifuge varied between the two cell culture fluids, with differences in centrate turbidity and centrate filterability measured. A comparison was then performed to determine resource savings, compared to direct two-stage depth filtration, when using a GEA kytero centrifuge to harvest a 1000 L bioreactor. The analysis concluded that replacement of the first stage of depth filters with a GEA kytero centrifuge has the potential to decrease the required second stage depth filtration area by up to 80%. The decrease in depth filter area resulting from the use of the GEA kytero would result in a decrease in the harvest step footprint, a decrease in buffer volume required to prime and rinse depth filters, and a decrease in the volume of plastic waste. An economic comparison of the GEA kytero single-use centrifuge against a direct depth filtration step found that for a 1000 L harvest step, the GEA kytero centrifuge may reduce costs by up to 20% compared with two-stage direct depth filtration.