Chemical Kinetics and Thermal Properties of Ablator Pyrolysis Products During Atmospheric Entry

Legacy and modern-day ablation codes typically assume equilibrium pyrolysis gas chemistry. Yet, experimental data suggest that speciation from resin decomposition is far from equilibrium. A thermal and chemical kinetic study was performed on pyrolysis gas advection through a porous char, using the Theoretical Ablative Composite for Open Testing (TACOT) as a demonstrator material. The finite-element tool SIERRA/Aria simulated the ablation of TACOT under various conditions. Temperature and phenolic decomposition rates generated from Aria were applied as inputs to a simulated network of perfectly stirred reactors (PSRs) in the chemical solver Cantera. A high-fidelity combustion mechanism computed the gas composition and thermal properties of the advecting pyrolyzate. The results indicate that pyrolysis gases do not rapidly achieve chemical equilibrium while traveling through the simulated material. Instead, a highly chemically reactive zone exists in the ablator between 1400 and 2500 K, wherein the modeled pyrolysis gases transition from a chemically frozen state to chemical equilibrium. These finite-rate results demonstrate a significant departure in computed pyrolysis gas properties from those derived from equilibrium solvers. Under the same conditions, finite-rate-derived gas is estimated to provide up to 50% less heat absorption than equilibrium-derived gas. This discrepancy suggests that nonequilibrium pyrolysis gas chemistry could substantially impact ablator material response models.