紧凑渺子线圈
μ介子对撞机
核工程
螺线管
物理
核物理学
超导磁体
超导超级对撞机
μ介子
粒子加速器
超导电性
凝聚态物理
工程类
梁(结构)
光学
量子力学
作者
Tim Mulder,Gianluca Vernassa,Leon Teichröb,B. Bordini,Patricia Borges de Sousa,A. Dudarev,Mariusz Woźniak,Arjan Verweij,L. Bottura
标识
DOI:10.1109/tasc.2025.3530379
摘要
The final stage of the cooling channel of a muon collider contains several cooling cells, each requiring a very high-field solenoid. Such a so-called ‘final cooling’ solenoid is key in strongly reducing the emittance of the beam during pre-acceleration and subsequent injection of the beam into the collider ring. In the muon collider design, about 12 to 14 final cooling solenoids of different lengths are foreseen. The conceptual design of the final cooling solenoid that is currently pursued has a homogeneous ($\sim$1%) magnetic field of $>$40 T over a length of approximately 0.5 m and features a stack of 52 No-Insulation (NI) High-Temperature Superconductor (HTS) pancake coils. Its ramp scheme has been investigated and a ramp profile has been derived for a constant dissipation of 200 W during the majority of the ramp, while keeping the overall magnet characteristic time at 2700 s. Protection calculations have been performed and show that these solenoids require active quench protection at nominal field to limit the Lorentz forces and thus tape tensile and magnet radial stress during a quench. This contribution provides an overview of the current state of the thermo-electromagnetic design, operational aspects, and several simulated quench and protection scenarios for our design of a final cooling solenoid for a muon collider.
科研通智能强力驱动
Strongly Powered by AbleSci AI