胶粘剂
材料科学
湿强度
丝绸
复合材料
原材料
丝素
耐水性
抗剪强度(土壤)
醛
席夫碱
环境友好型
粘结强度
复合数
牙髓(牙)
极限抗拉强度
挤压
化学工程
脲醛
耐热性
明胶
水分
共价键
机械强度
艾氏冲击强度试验
粘结强度
耐化学性
肿胀 的
氢键
压延
戊二醛
热塑性塑料
作者
Hongshan Li,Yang Bai,Yingzhang Liu,Yanqun Huang,Xin Duan,Yihong Gao,P. Wang,Rong Liu,Guanben Du,Long Yang
标识
DOI:10.1021/acssuschemeng.5c13487
摘要
Aiming at the low strength and poor water resistance of traditional biomass adhesives and the environmental risks of petroleum-based adhesives, this study developed a formaldehyde-free silk fibroin/gelatin (SF/GEL) biomass wood adhesive based on the synergistic effect of β-sheet structure and interfacial Schiff base reaction. Aldehyde groups were introduced on wood surfaces via “NaOH pretreatment-NaIO 4 oxidation” modification. The β-sheet structure of silk fibroin enhanced the cohesion of the adhesive layer, while gelatin enhanced wettability. Under hot-pressing, aldehyde groups reacted with amino groups to form Schiff base covalent bonds, which combined with mechanical interlocking to realize interface strengthening. Under the optimal process (SF/GEL = 1:1, hot-pressing at 140 °C for 6 min), the dry strength of eucalyptus plywood reached 3.75 ± 0.25 MPa, and remained 2.95 ± 0.37 MPa after cyclic aging (soaking the specimens in boiling water for 4 h, followed by drying for 20 h, repeating this cycle twice; then testing the bonding strength after soaking the specimens in cold water for 1 h), exceeding the bonding strength requirement of 0.7 MPa specified in the GB/T 17657-2022 national standard. The dry strength of poplar plywood was 2.75 ± 0.30 MPa, and remained 1.98 ± 0.28 MPa after cyclic aging, also exceeding the 0.7 MPa bonding strength requirement of the GB/T 17657-2022 national standard. With renewable raw materials and environmentally friendly process, this adhesive provides a green and high-performance solution for the wood processing industry.
科研通智能强力驱动
Strongly Powered by AbleSci AI