络腮胡子
材料科学
复合材料
硅
单晶晶须
多孔性
堆积
导电体
聚合物
渗氮
传质
填料(材料)
氮化硅
化学工程
碳热反应
胶粘剂
钎焊
作者
Yongqi Wang,Huicong Lei,H. Zhang,Yabo Gao,Yage Li,Shaowei Zhang,Ying Xu,Zhong Xian Huang
摘要
ABSTRACT Direct nitridation is widely applied for industrial‐scale preparation of Si 3 N 4 , while facing a persistent challenge of incomplete nitridation due to melting and volatilization of Si powder. In this work, a foaming‐assisted route, in which the porous Si foams were used as the staring material, was developed to prepare the Si 3 N 4 whiskers from the perspective of mass production. A complete nitridation at 1300°C could be achieved, which is lower or comparable to those reported previously for preparation of whiskers. The interconnected “pores” of Si foam not only provided the N 2 pathways, which enabled it to enter the interior efficiently, thus promoting its reaction of Si nitridation regardless of foam sizes, but also provided enough surface for the growth of whiskers. The as‐prepared Si 3 N 4 whiskers could be potentially used as a thermally conductive filler in resin composites, which enhanced the heat transfer and robustness of the polymer matrix. By simply stacking these Si foams in an industrial nitriding furnace, a scale‐up preparation of Si 3 N 4 whiskers can be realized without complex operations, anticipating its applicability for industrial production.
科研通智能强力驱动
Strongly Powered by AbleSci AI