偏转(物理)
微电子机械系统
材料科学
压阻效应
灵敏度(控制系统)
非线性系统
压力传感器
振膜(声学)
梁(结构)
声学
压力(语言学)
优化设计
电子工程
悬臂梁
表面应力
结构工程
稳健性(进化)
有限元法
响应时间
作者
T. F. Wang,Zibang Xiao,P. Y. Chen,Meng Nie,Zhen Yan,Shijie Deng,Jing Chen,Xiaolin Wang,Jingquan Liu
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2026-09-08
卷期号:17 (9): 1062-1062
摘要
To address the difficulty of balancing sensitivity and nonlinearity in MEMS piezoresistive pressure sensors, this study proposes an MEMS piezoresistive pressure sensor with a narrow cross-beam membrane-short beam structure. The structure introduces a tapered design at the ends of a conventional cross beam and incorporates short beams to enhance stress concentration in the sensitive regions, thereby improving output sensitivity while maintaining low nonlinearity. Finite-element analysis was performed to evaluate the stress distribution and deflection characteristics and to compare the proposed structure with conventional cross-beam and other diaphragm structures. Under identical overall dimensions, the proposed structure improves sensitivity by 61% relative to the conventional cross beam. Based on the finite-element results, multivariate fitting models for surface stress and deflection were established, and nonlinear optimization was used to determine the constrained optimal geometrical parameters within the validated design domain. Simulation results indicate that, over a pressure range of 0-1 kPa, the proposed sensor achieves a sensitivity of 12.23 mV/V/kPa and a maximum nonlinearity of 0.196% FSS, demonstrating favorable performance for micropressure detection.
科研通智能强力驱动
Strongly Powered by AbleSci AI