校准
热的
材料科学
稳健性(进化)
灵敏度(控制系统)
反向
电阻器
机械
温度测量
发热
热阻
反问题
水准点(测量)
热力学
电池(电)
生物系统
热电偶
电极
实验数据
边值问题
校准曲线
边界(拓扑)
电化学
观测误差
核工程
估计理论
电化学电池
热容
分析化学(期刊)
热分析
内部加热
控制理论(社会学)
热透过率
近似误差
作者
Joanna Kozma,Khadija El Kadri Benkara,Rabih Dib,Christophe Forgez,Nazih Moubayed,Guy Friedrich
标识
DOI:10.1016/j.est.2026.123028
摘要
Reliable quantification of heat generation in lithium-ion batteries remains challenging, especially under realistic cycling conditions where calorimeters are impractical and thermal models depend on uncertain boundary conditions. This study presents a time-resolved method to quantify the heat released by a 5 Ah commercial NMC811/G–Si cylindrical cell using a calibrated heat-flux sensor covering the lateral surface. A dedicated calibration campaign using a custom cylindrical resistor enabled determination of the Measured Heat-Flow Ratio (MHFR), allowing conversion of local heat-flux measurements into total heat output. To assess the robustness of this approach, two additional heat-generation estimates were obtained independently: one from an inverse lumped thermal model using an experimentally identified overall heat capacity of 61 J K − 1 and an external thermal resistance that decreased from 12 . 47 K W − 1 at 1C to 10 . 97 K W − 1 at 2C under natural convection, and another from an electrochemical model incorporating a pseudo-OCV curve measured at C/50 and an entropy-coefficient profile. All three methods were applied to the same cell across C-rates of 1C, 1.5C, and 2C. Quantitative error metrics validate the excellent agreement between direct heat-flux measurements and the inverse thermal model (max RMSE: 1.7% at 2C). Conversely, the electrochemical model deviated significantly at high C-rates (RMSE: 15.4% at 2C), reflecting the sensitivity of reversible heat and overpotentials to internal gradients and thermodynamic hysteresis. These results establish calibrated heat-flux sensing as an experimentally robust alternative for characterizing battery thermal behavior and provide benchmark data for improving electrochemical–thermal models.
科研通智能强力驱动
Strongly Powered by AbleSci AI