摘要
The safe and effective disposal of radioactive materials is of great importance for the future, which has positioned shales and similar clay-rich rocks with their natural barrier function into focus as promising host rocks. Their low permeability, favorable mechanical properties, and ability to prevent the migration of radionuclides are critical for the successful long-term storage. To ensure the reliability of long-term performance assessments of these repositories, it is essential to understand the individual thermo-hydro-mechanical deformation processes in the rock. This applies not only to the short-term perspective, but also to the medium- (post-excavation to closure) and long-term (post-closure) periods. Creep and consolidation are two fundamentally different phenomena that are particularly relevant in the medium- to long-term perspective. They can lead to squeezing rock behavior around a tunnel excavation or even to delayed rock failure, causing the excavation damaged zone to progress over time. Plastic tunnel convergence due to consolidation processes is associated with effective stress changes. In contrast, convergence due to creep is related to the rheological behavior of the rock. Creep in clay shales is not yet sufficiently understood, which makes it challenging to distinguish between these phenomena when processes occur simultaneously. However, the distinction between consolidation and creep is crucial in order to assess their significance across different time scales. This thesis investigated the time-dependent rheological deformation behavior of the Opalinus Clay formation. This formation was selected as the host rock in the Swiss program for radioactive waste disposal. To deepen the understanding of creep in clay shales, a laboratory study was conducted that included a series of drained multi-stage creep tests on consolidated and fully saturated specimens. In addition, the tested specimens were analyzed using high-resolution scanning electron microscopy to investigate the creep failure processes at the microstructural level. This study addresses three main research questions. (1) What is the fundamental creep behavior of the Opalinus Clay under fully drained and saturated conditions, and what are the underlying creep mechanisms? (2) How does structural anisotropy influence the creep behavior? (3) What is the impact of elevated temperatures on the creep behavior, individual creep mechanisms, and the long-term strength? The results of this study demonstrated a significant creep potential of the rock. Further, the multi-stage testing approach enabled the analysis of the stress dependency of creep. In this context, two different types of creep deformation were identified under certain stress conditions. At low differential stresses, creep was observed to be stress-insensitive and dominated by strengthening mechanisms, accompanied by overall compaction. This compaction is associated with microcrack and pore closure, as well as creep deformation due to diffusive mass transfer. Conversely, at high differential stresses, the creep behavior shifted towards weakening-dominated processes associated with time-dependent microfracturing. In these scenarios, the rock dilated until a specific microfracture density was reached, followed by the onset of tertiary creep. The transition between these two creep types is inferred to represent the long-term strength, which is significantly lower than the short-term strength (~ 63 % of peak strength). Nevertheless, due to the limited duration of laboratory tests, creep failure only occurred close to the stress conditions of the short-term strength. At the microstructural level, creep failure showed a highly localized shear zone with characteristics of brittle failure that were identical to those observed from short-term failure under comparable testing conditions. In order to investigate creep behavior taking structural anisotropy into account, two different loading configurations (parallel and perpendicular to the loading axis) were tested in this study. The results revealed a strong anisotropic creep character, with increased creep accumulation when loaded perpendicular to the bedding. Furthermore, the strengthening effect was found to be more pronounced in these specimens due to the stronger axial compression. This observation is consistent with the elasto-plastic short-term behavior of Opalinus Clay. Nevertheless, the long-term strength itself and prevailing mechanisms under certain stress conditions were found to be similar for both tested loading configurations. In order to investigate the impact of expected elevated temperatures on the time-dependent deformation behavior, a series of consolidation and creep tests at both 30 and 60°C were compared. The results indicated that the consolidation phase exhibited increased compaction, which can be attributed to the thermal alterations of the rock structure during heating. In contrast, temperatures of 60°C did not show any impact on the creep behavior. This work provides valuable data on the time-dependent rheological deformation behavior of Opalinus Clay, which was previously lacking. The results will contribute to future work on numerical simulation and enhance the reliability of long-term performance assessments of deep geological repositories in claystone formations.