同质结
材料科学
非阻塞I/O
分压
基质(水族馆)
化学计量学
分析化学(期刊)
溅射沉积
图层(电子)
溅射
氧化物
氧气
沉积(地质)
化学工程
薄膜
光电子学
纳米技术
兴奋剂
冶金
地质学
工程类
海洋学
古生物学
催化作用
生物
有机化学
化学
生物化学
色谱法
沉积物
作者
Maria Isabel Pintor Monroy,Bayron L. Murillo-Borjas,M. Catalano,Manuel Angel Quevedo-Lopez
标识
DOI:10.1021/acsami.9b04380
摘要
The oxygen partial pressure during NiO deposition in reactive sputtering of a Ni target is used to control its carrier type and concentration, obtaining both n- and p-type films. Carrier concentration can be controlled, ranging from 10 19 to 10 14 cm –3 . Films deposition is performed at 200 °C, a relatively low temperature that enables the use of glass as substrate. Experimental band diagrams for n-type NiO are obtained for the first time. Finally, a NiO homojunction is demonstrated by introducing a low carrier concentration layer in between n- and p + -type NiO layers. Layers are deposited in situ, preventing contamination and improving the interface quality, as observed by TEM. The Ni:O ratio for each layer was also obtained by analytical TEM measurements, demonstrating the impact of the oxygen partial pressure on the films’ stoichiometry and the simplicity of our process to control carrier type and carrier concentration in oxide semiconductors.
科研通智能强力驱动
Strongly Powered by AbleSci AI