高分子化学
磷酸
苯甲酸
化学
热稳定性
缩聚物
单体
溶解度
聚合
热重分析
膜
聚合物
胺气处理
核化学
有机化学
生物化学
作者
Hongjie Xu,Kangcheng Chen,Xiaoxia Guo,Jianhua Fang,Jie Yin
摘要
Abstract Hyperbranched polybenzimidazoles (HBPBIs) were successfully synthesized by condensation polymerization of 1,3,5‐benzenetricarboxylic acid (BTA) and 3,3′‐diaminobenzidine (DAB) in polyphosphoric acid (PPA) at 190 °C. Different monomer addition manners and molar ratios resulted in different polymers, that is, simultaneous addition of BTA and DAB with the molar ratio of 1:1 (manner 1) gave carboxyl‐terminated HBPBI (HBPBI‐1), whereas the addition of BTA portion‐wise to DAB solution in PPA with the molar ratio of DAB:BTA = 2:1 (manner 2) yielded amine‐terminated HBPBI (HBPBI‐2). The free carboxyl and amino groups of HBPBI‐1 and HBPBI‐2 could further react with o‐diaminobenzene and benzoic acid, respectively, to form the chemically modified polymers. Except HBPBI‐2, all the HBPBIs showed good solubility in some organic solvents (e.g., dimethyl sulfoxide and N,N‐dimethylacetamide). Thermogravimetric analysis measurement revealed that HBPBIs except HBPBI‐1 had high thermal stability (>450 °C). HBPBI membranes with good mechanical properties were obtained by crosslinking treatment of partially chemically modified HBPBIs with terephthaldehyde (TPA) during the film cast process. The HBPBI membranes had high phosphoric acid uptake and the phosphoric acid‐doped HBPBI‐6 (40% o‐diamino groups were reacted with benzoic acid) membrane showed higher tensile strength than the acid‐doped commercial PBI despite the higher doping level of the former. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1150–1158, 2007
科研通智能强力驱动
Strongly Powered by AbleSci AI