塔菲尔方程
硫化钴
X射线光电子能谱
材料科学
过电位
电极
电化学
钴
化学工程
析氧
扫描电子显微镜
硫化物
纳米结构
纳米技术
化学
复合材料
冶金
物理化学
工程类
作者
Xinyu Li,Surbhi Sharma,Damien W. M. Arrigan,Debbie S. Silvester
标识
DOI:10.1149/1945-7111/ac6986
摘要
A wide range of electrocatalysts have been developed and implemented for electrochemical applications over the last decades, with researchers typically using either a conventional synthesis method (followed by drop-casting or spray-coating onto the electrode), or directly electrodepositing the catalyst. However, a clear comparison of the different materials synthesis techniques, and how this affects the electrochemical applications, has been less explored. Herein, we report a direct comparison of fabricated cobalt sulfide (CoS) nanostructure-based electrodes prepared by two different methods for two applications: (a) electrochemical water splitting and (b) glucose sensing. CoS is grown in the form of nanoflowers and nanosheets via facile one-pot hydrothermal (HT) and electrodeposition (ED) methods, respectively. Characterization is performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). It is observed that the as-fabricated CoS-ED electrode demonstrated enhanced oxygen evolution reaction (OER) performance, a lower overpotential (∼166 mV at 10 mA cm −2 ), lower charge transfer resistance (∼372 Ω), a lower Tafel slope (86 mV dec −1 ), and better stability compared to the CoS-HT electrode. Moreover, the CoS-ED electrode-based sensor also exhibited better performance, higher sensitivity, better selectivity, and good stability for electrochemical glucose detection compared to the CoS-HT sensor.
科研通智能强力驱动
Strongly Powered by AbleSci AI