Bioacessibility of PAHs in Fuel Soot Assessed by an in Vitro Digestive Model: Effect of Including an Absorptive Sink

Polycyclic aromatic hydrocarbons (PAHs) associated with soot or black carbon can enter the human digestive tract by unintentional ingestion of soil or other particles. This study investigated the bioaccessibility of 11 PAHs in a composite fuel soot sample using an in vitro digestive model that included silicone sheet as an absorptive sink during the small intestinal digestion stage. The sheet was meant to simulate the passive transfer of PAHs in lumen fluid across the small intestinal epithelium, which was postulated to promote desorption of labile PAHs from the soot by steepening the soot-fluid concentration gradient. We show that the presence of silicone sheet during a 4 h default digestion time significantly increased the apparent bioaccessible fraction (Bapp, %), defined as the sum in the sheet and digestive fluid relative to the total PAH determined. The ability to increase Bapp for most PAHs leveled off above a sheet-to-soot ratio of 2.0 g per 50 mg, indicating that the sheet is an effective absorptive sink and promotes desorption in the mentioned way. Enhancement of Bapp by the sheet correlated positively with the octanol-water partition coefficient (Kow), even though the partition coefficient of PAH between sheet and digestive fluid (which contains bile acid micelles) correlated negatively with Kow. It was hypothesized that PAHs initially in the soot exist in labile and nonlabile states. The fraction of labile PAH still sorbed to the soot residue after digestion, and the maximum possible (limiting) bioaccessibility (Blim) could be estimated by varying the sheet-to-soot ratio. We show conclusively that the increase in bioccessibility due to the presence of the sheet is accounted for by a corresponding decrease in fraction of labile PAH still sorbed to the soot. The Blim ranged from 30.8 to 62.4%, independent of molecular size. The nonlabile fraction of individual PAHs (69.2-37.6% in this case) is therefore large and needs to be taken into account in risk assessment.