化学
溶解
锰
氧化还原
水溶液
无机化学
铬
降水
溶解度平衡
扩散
反应速率常数
氧化物
溶解度
核化学
动力学
物理化学
气象学
有机化学
物理
量子力学
热力学
作者
Chao Pan,Huan Liu,Jeffrey G. Catalano,Zimeng Wang,Ao Qian,Daniel E. Giammar
标识
DOI:10.1021/acsearthspacechem.8b00129
摘要
Manganese oxides are the major oxidants of Cr(III) to Cr(VI) in natural environments. This study evaluated the rate and extent of oxidation of Cr(III) released from Cr(OH) 3 by δ-MnO 2 from pH 5 to 9 with a particular focus on quantifying the rate constant for Cr(III) oxidation on the MnO 2 surface. The Cr(III) oxidation rate was initially fast, but it then slowed and ceased for pH 5 to pH 7, which agrees with previously reported inhibition of the redox reaction above pH 4 by precipitation of Cr(III) on the MnO 2 surface. Above pH 7, overall Cr(VI) production was higher than at lower pH even though the dissolved Cr(III) concentration in equilibrium with Cr(OH) 3 was lower. This is probably due to the reoxidation of aqueous Mn(II) by dissolved oxygen at higher pH, which made more manganese oxide available to oxidize Cr(III) to Cr(VI). Multichamber experiments were used to assess the role of solid–solid proximity in Cr(OH) 3 –MnO 2 interactions at pH 5. The different rates and extents of Cr(VI) production in the multichamber reactor and completely mixed batch reactor indicate that mixing of Cr(OH) 3 and MnO 2 solids plays a role in the rate and extent of Cr(VI) generation. Further Cr(VI) generation in this systems strongly depends on pH. Because of the importance of mass transfer of Cr(III) to MnO 2 solids for the overall Cr(III) oxidation process, the net rate of Cr(VI) generation in natural environments with Cr(III)-containing solids and MnO 2 can be orders of magnitude slower than observed in well-mixed laboratory-scale batch experiments.
科研通智能强力驱动
Strongly Powered by AbleSci AI