作者
Lei Jiang,Longxiao Ji,Shengxing Wang,Shuotong Liu,Xiaozhen Hu,Kaining Chen,Shan Liu,Li‐Jun Zhou,Qinglong L. Wu
摘要
Tire additives, classified as high-production-volume chemicals, are released onto road surfaces through tire-road abrasion and subsequently transported into various environments such as rivers, lakes, and soils via surface runoff. Both tire additives and their transformation products (TATPs) have been demonstrated to exert adverse effects on aquatic ecosystems. However, their contamination profiles in large urban lakes remain unclear. To address this gap, 16 TATPs were profiled in the surface waters of Chao Lake during summer and winter. Pronounced seasonal differences were observed in the occurrence of TATPs. Nine compounds were detected in summer and 12 in winter. The total concentrations of detected TATPs ranged from 5,551 to 25,201 ng/L in summer and from 2,834 to 15,235 ng/L in winter, with significantly higher levels observed in summer ( p < 0.01). Although the compositional profiles of TATPs varied seasonally, 1H-benzotriazole (BT) and benzothiazole (BTH) consistently dominated as the primary contaminants. Ecological risk quotient (RQ) assessment showed that the overall potential ecological risk, expressed as the hazard index (HI), exceeded 1 at 55.6% of the sampling sites in summer and 74.1% in winter, with N,N′ -diphenylurea (DPU) identified as the primary contributor. Using a multi-criteria prioritization framework, four compounds including 2-methylthio-benzothiazole (2-Me-S-BTH), DPU, BTH, and N -(1,3-Dimethylbutyl)- N' -phenyl- p -phenylenediamine quinone (6PPD-Q) and three compounds including 2-Me-S-BTH, BTH, and DPU were identified as high-priority contaminants in summer and winter, respectively. These findings highlight the necessity of temporally resolved monitoring of TATPs in freshwater lakes and underscore the need for increased attention to ubiquitous and environmentally hazardous TATPs in future investigations.