夹持器
抓住
乙状窦函数
可解释性
管道(软件)
人工智能
计算机科学
弯曲
信号(编程语言)
有效载荷(计算)
机器人学
软机器人
弹道
工程类
触觉传感器
信号处理
公制(单位)
控制工程
计算机视觉
软传感器
机器人
机械臂
贴片设备
工作(物理)
软计算
功能(生物学)
控制理论(社会学)
作者
Batanai Alistair Chimuka,Hongjun Li
标识
DOI:10.1177/09544089261497750
摘要
Soft robotic grippers are uniquely suited for handling fragile objects, yet reliable contact-state awareness remains challenging due to sensor noise, signal drift, and limited interpretability of current approaches. This study presents an interpretable two-stage analytical pipeline for contact estimation of a pneumatic soft gripper using low-cost commercial flex sensors embedded within an endoskeleton-reinforced PneuNet structure. The pipeline first establishes pressure–bending relationships through sigmoidal modelling of single-finger mechanics, delineating free bending, initial contact, and full engagement (blocking). A multi-finger comparative analysis then uses differences in transition pressures and bending trajectories among fingers to infer object geometry and detect abnormal grasp behavior. Evaluated across 10 objects; spherical, cylindrical, asymmetric, delicate, and miniature; symmetrical objects synchronized, while irregular objects showed staggered finger engagement. The sigmoidal model achieved a mean R 2 = 0.94 across blocking positions. The gripper achieved an 80% grasp success rate across 10 diverse objects and a 650 g payload capacity. Comparing bending trajectories further detects yielding (in delicate objects) during grasping. By combining physically interpretable modelling with lightweight signal processing, the proposed approach achieves contact-state estimation using cost-effective sensing hardware without custom tactile arrays, training data, or computationally intensive models. This work offers a practical pathway toward low-cost sensing solutions for soft robotic manipulation in industrial applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI