Hypervelocity Impact Detection and Location for Stiffened Structures Using a Probabilistic Hyperbola Method

Hyper-velocity impact (HVI) caused by a collision between orbital debris and spacecraft exists widely in outer space, and it poses a threat to spacecraft. This paper proposes a probabilistic hyperbola method based on Lamb waves analysis to detect and locate the impact in stiffened aluminum (Al) plates. A hybrid model using finite element analysis (FEA) and smoothed particle hydrodynamics (SPH) was developed to gain an insight into characteristics of HVI-induced acoustic emission (AE) and shock wave propagation. In addition, an experimental validation was carried out with a two-stage light gas gun, giving an aluminum projectile a velocity of several kilometers per second. Then a quantitative agreement is obtained between numerical and experimental results, demonstrating the correctness of the hybrid model and facilitating the explanation of received AE signals in experiments. Signal analysis shows that the shock wave quickly converts to a Lamb wave as it propagates from the HVI spot, and the zeroth-order symmetric wave mode (S0) dominates wave signal energy. The S0 wave is dispersive and shows a wide frequency range, with dominant magnitudes below 500 kHz. Finally, the HVI experiment results obtained with a light gas gun showed that the average location error could be less than 1 cm with only four sensors for a 1-square-meter stiffened metal plate.