成核
材料科学
挤压
气泡
聚丙烯
发泡剂
复合材料
高压灭菌器
剪切速率
增长率
液体气泡
发泡剂
化学工程
热力学
粘度
机械
冶金
物理
聚氨酯
工程类
几何学
数学
多孔性
作者
Kentaro Taki,Takashi Nakayama,Taichi Yatsuzuka,Masahiro Ohshima
标识
DOI:10.1177/0021955x03039002005
摘要
The visual observations of batch and continuous foaming processes were conducted to understand the bubble nucleation and bubble growth behaviors in polymers. The batch foaming was performed using a newly developed high-pressure cell, where two sapphire windows were equipped on the walls so as to observe the early stage of bubble nucleation and growth behaviors with the help of a high-speed digital camera and microscope. In the batch process, homo polypropylene was foamed at different pressure release rates using CO 2 as a physical blowing agent to see the effects of operating condition on the bubble nucleation and growth rates. The in situ observation could identify that (1) the bubble nucleation and growth occur simultaneously, (2) the influence region, where the nucleation was suppressed, exists around bubbles, and (3) the nucleation rate and the growth rate increase as the pressure release rate increases. The continuous foaming was performed using a different visualization unit, which consists of an autoclave and an extrusion slit-die with quartz windows. It was found that the nucleation mechanism in the continuous foaming, i.e., extrusion foaming, was different from that of batch foaming. In the continuous extrusion foaming, the nucleation could be induced by flow and/or shear stress, and by cavitations brought by the surface roughness of the wall.
科研通智能强力驱动
Strongly Powered by AbleSci AI