阳极氧化
腐蚀
材料科学
钛
电解质
冶金
合金
沸腾
锂(药物)
铝
硅酸盐
盐(化学)
硅酸钠
钛合金
硫酸
化学工程
化学
电极
有机化学
物理化学
内分泌学
工程类
医学
作者
Qiuli Wang,Hongjian Li
标识
DOI:10.1016/j.ijoes.2023.100186
摘要
2099 aluminum lithium alloy is anodized in sulfuric acid electrolyte, and then is sealed in boiling water, silicate solution and titanium salt solution respectively to further improve the corrosion resistance. The experimental results show that a porous anodized film is formed on the surface of 2099 aluminum lithium alloy. The surface morphology and composition of the anodized film are changed significantly after being sealed in boiling water, silicate solution and titanium salt solution, resulting in the enhancement of the corrosion resistance. The effect of sealing in silicate solution is better than that of in boiling water. There are fewer pores in the anodized film after sealing treatment in silicate solution, which has better corrosion resistance. The sealing effect is the best in titanium salt solution. After sealing treatment in titanium salt solution, the anodized film shows the best corrosion resistance. It is found that titanium salt solution is an environmental friendly sealing solution and can significantly improve the corrosion resistance of anodized film on aluminum lithium alloy.
科研通智能强力驱动
Strongly Powered by AbleSci AI