材料科学
多孔性
溶胶凝胶
化学工程
光电化学
多孔介质
纳米技术
电化学
化学
复合材料
电极
物理化学
工程类
作者
Lukas Max Mayer,Roland Marschall
标识
DOI:10.1002/cptc.202500191
摘要
Photoelectrochemical hydrogen production is a promising and cost‐effective strategy to provide clean and sustainable fuel. Due to its excellent electrical and optical properties, tungsten trioxide (WO 3 ) is one of the most studied electrode materials in this field, and it is well known that the incorporation of pores into the semiconductor can improve its photoelectrochemical performance. Using a facile and scalable template‐assisted sol–gel technique, porous WO 3 thin films were tailored by simply varying the number of dip coating cycles. By crystallizing these films at 400 °C, a ‐orthorhombic/‐monoclinic crystal structure and an average surface area of 32 m 2 g −1 were obtained. By optimizing the layer thickness of these photoanodes on fluorine‐doped tin oxide, photocurrents of up to 3.3 mA cm −2 at 1.23 V RHE (in 0.1M H 2 SO 4 , pH = 0.71) were achieved without the use of any co‐catalysts or sacrificial agents. Our photoelectrodes also showed highly reproducible photocurrents, and their high stability was proven in cycling tests, long‐term measurement and post‐photoelectrochemical characterization. Our work represents a very simple preparation optimization to achieve high‐performing WO 3 photoanodes for photoelectrochemical applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI