A new approach to MPPT hybrid incremental conductance-sliding mode control for PV grid-connected

As photovoltaic energy is clean, renewable, and less noisy, it is increasingly integrated into the grid. This integration aims to overcome energy deficits and get rid of pollution from conventional sources. In this paper, a two-stage configuration of PV energy conversion to a three-phase grid has been studied. The control of this configuration can be divided into two parts, such as DC bus control and AC bus control. The DC bus is controlled by MPPT control. The AC bus is controlled by DC link voltage control, phase-looked loop control, and voltage source inverter control. The contribution in this study aims to improve the quality of energy injected via a new hybrid approach to MPPT control. The proposed control is a combination of robust sliding-mode control and incremental inductance. Unlike conventional hybridization, the proposed control estimates correct the error upon entry of the conductance incremental control. This correction provides an adaptive incremental step for increment conductance control. The proposed control is compared with three other controls under MATLAB/Simulink. Such as incremental conductance, variable step size incremental conductance, and conventional hybrid MPPT incremental inductance-sliding mode control. The simulation results show a remarkable minimization of the ripple phenomenon and the chatter phenomenon. Thus, the quality of the energy injected into the network is improved, such as by reducing the total harmonic distortion of the current and increasing efficiency.