锂(药物)
溶剂
泡沫浮选
离子
废物管理
化学
工艺工程
制浆造纸工业
环境科学
材料科学
有机化学
工程类
医学
内分泌学
作者
Aliza Marie Salces,Marc Simon Henderson,A. Rodríguez-Medina,Kai Bachmann,Elsayed A. Oraby,Chau Chun Beh,Martin Rudolph,Jacques J. Eksteen,Anna Vanderbruggen
出处
期刊:
[American Chemical Society]
日期:2025-06-05
卷期号:2 (6): 1021-1029
被引量:16
标识
DOI:10.1021/acssusresmgt.5c00058
摘要
High Resolution Image Download MS PowerPoint Slide Froth flotation effectively separates anode graphite from cathode active materials (CAMs) of spent lithium-ion batteries when CAM particles are free of organic binders, such as polyvinylidene fluoride (PVDF). This study investigated a bio-based solvent, dihydrolevoglucosenone (Cyrene TM ), as a pretreatment to remove the PVDF binder from both single chemistry black mass (BM) and industrially produced mixed chemistry black mass (IBM). The subsequent flotation combined with high-intensity attritioning improved CAMs and graphite separation efficiency compared to that of mechanical pretreatment alone, increasing from 0.30 to 0.53 in BM and from 0.37 to 0.54 in IBM. Although pyrolysis resulted in higher separation efficiencies of 0.92 in BM and 0.78 in IBM, Cyrene pretreatment presents advantages in non-emission of toxic gases and in preserving lithium within the CAMs. In the flotation process water, an average lithium dissolution of only 5.5% in BM and 14.7% in IBM was recorded with Cyrene pretreatment, compared to that of 29.3% in BM and 55.4% in IBM with pyrolysis pretreatment. The lower quality of the flotation products obtained with Cyrene pretreatment necessitates further purification steps such as cleaner flotation. Optimizing pretreatment parameters is crucial, including the Cyrene to black mass ratio and contact time. A key challenge is preventing the thermally induced phase separation of PVDF at temperatures lower than 80 °C, which negatively affects the effective separation of graphite and CAMs by froth flotation.
科研通智能强力驱动
Strongly Powered by AbleSci AI