逻辑门
逆变器
三元运算
通流晶体管逻辑
晶体管
逻辑族
材料科学
电子工程
电子线路
电压
光电子学
电气工程
计算机科学
逻辑综合
工程类
程序设计语言
作者
Debdatta Panigrahi,Ryoma Hayakawa,Junko Aimi,Yutaka Wakayama
标识
DOI:10.1002/admt.202301049
摘要
Abstract Multivalued logic (MVL) circuits offer higher information density compared with conventional binary logic circuits. However, achieving a proper balance between logic states and a low‐voltage gain remains a challenge in MVL devices. This study proposes two strategies to address this problem: using the optical absorption of organic semiconductors and optimizing device geometry. A ternary inverter is fabricated using a series circuit consisting of an antiambipolar transistor with a heterojunction of C8‐BTBT and PTCDI‐C8 semiconductors and a PTCDI‐C8 transistor. Although the inverter exhibits three distinct logic levels, it suffers from an inadequate voltage balance between the ternary logic states. To overcome this, UV light irradiation is employed first to modulate the transistor characteristics, thus improving the output voltage level and input voltage range of the logic ½ state. Subsequently, the channel length of the PTCDI‐C8 transistor is optimized to further enhance the voltage transfer characteristics of the inverter. Through these combined techniques, ideal output voltage levels are achieved for all three logic states along with an enhanced voltage gain during the transition from the logic ½ state to the logic 0 state. This work is thus an advancement toward reliable, efficient organic ternary logic circuits.
科研通智能强力驱动
Strongly Powered by AbleSci AI