薄膜
材料科学
薄膜太阳能电池
太阳能电池
工程物理
光电子学
纳米技术
物理
作者
O. Surucu,M. Isik,M. Terlemezoglu,T. Bektas,M. Isik,M. Parlak
标识
DOI:10.1016/j.optmat.2022.113047
摘要
CuSbSe 2 thin film was deposited by co-evaporation of binary CuSe and Sb 2 Se 3 sources. The structural and morphological properties of the deposited thin film were investigated with X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis measurements. XRD pattern indicated that deposited thin film has an orthorhombic crystalline structure with the preferential orientation of (013) direction. SEM image presented that the thin film surface is almost uniform. The optical characteristics of the deposited CuSbSe 2 thin film were investigated in detail by performing room temperature Raman, temperature-dependent transmittance spectroscopy, and photoluminescence techniques. Raman spectrum exhibited one mode at around 210 cm −1 associated with A g vibrational mode. The derivative spectroscopy technique was used to obtain the band gap energy of the films. Temperature dependence of band gap energy was investigated by considering the Varshni model. The rate of change of band gap energy, absolute zero value of gap energy, and Debye temperature were determined as −1.3 × 10 −4 eV/K, 1.21 eV, and 297 ± 51 K, respectively. The photoluminescence spectrum indicated the room temperature direct band gap energy as 1.30 eV. • The CuSbSe 2 thin film was deposited by co-evaporation of binary CuSe and Sb 2 Se 3 sources • The derivative spectroscopy technique was used to obtain the band gap energy of the films. • CuSbSe 2 provides tunable properties which are valuable for photovoltaic applications. • The direct optical band gap value of CuSbSe 2 was determined as 1.32 eV.
科研通智能强力驱动
Strongly Powered by AbleSci AI