Coupled effect of prestrain and intermediate annealing on mechanical properties and microstructural evolution of GH5188 superalloy

The forming of sheet metal parts with complex structures often requires multiple processing. The Co-based superalloy GH5188 sheet is taken as the research object for two-stage uniaxial tensile experiments including intermediate heat treatment, where the prestrain is 10%, 20% and 30%, respectively, in the first stage. The results indicate that the macroscopic residual stress increases with increasing prestrain, which is manifested as the increase of the initial yield strength, the deterioration of ductility and work hardening ability. The increase in dislocation density in the plastic deformation process is the decisive factor. After annealing, the number of deformed grains greatly reduces, and the grain size is refined, resulting in a corresponding reduction in dislocation density. Intermediate heat treatment can eliminate dislocation stacking and stress concentration in the alloy and reduce the influence of internal stress generated during work hardening. Furthermore, the intermediate annealing can decrease the initial yield stress and increase the elongation of the predeformed sheet, while retaining desirable work hardening ability and tensile strength, ultimately enhancing the subsequent work performance.