Mechanical Abrasion of Laser‐Machined Highly Hydrophobic Stainless Steel Surface Depending on Surface Topography

Stainless steel (SST) is an important material for a variety of applications including construction, food, and medical. Highly hydrophobic wetting properties enhance the surface properties of SST to support processes such as self‐cleaning . However, applications also require long‐term stability of such properties against chemical and mechanical influences from the environment or technical processes. Therefore, the reduction of highly hydrophobicity of chemically modified, laser‐textured SST surfaces is investigated in relation to abrasive wear using hierarchical structures, micro‐/nanotextured surface, and support structures that shield the highly hydrophobic pattern. Surface textures comprising ridges, grooves (size: 50–500 μm; depth: up to 100 μm), and a nanostructured grooves bottom are machined by infrared ultrashort pulse laser ablation into SST and are subsequently chemically modified by a self‐assembled monolayer of a fluorinated, phosphonic acid‐modified alkane. Abrasive wear tests of these surfaces show decreasing water contact angles with increasing wear of the modified surface of the support structures. However, there is good stability of the highly hydrophobic properties due to the protection of modified areas at the groove bottom. The proposed wetting model for such designed functionalized laser textures shows possibilities for further optimization of such robust highly hydrophobic surfaces and adaptation to specific applications.