材料科学
化学工程
氢
锐钛矿
光催化分解水
分解水
二氧化钛
X射线光电子能谱
作者
Shiping Xu,Darren Delai Sun
标识
DOI:10.1016/j.ijhydene.2009.05.119
摘要
Abstract TiO 2 photocatalyst with deposited CuO (CuO-TiO 2 ) was synthesized by the impregnation method using P25 (Degussa) as support, and exhibited high photocatalytic hydrogen generation activity from methanol/water solution. A substantial hydrogen evolution rate of 10.2 ml min −1 (18,500 μmol h −1 g −1 catalyst ) was observed over this efficient CuO-TiO 2 with optimal Cu content of 9.1 mol% from an aqueous solution containing 10 vol% methanol; this improved hydrogen generation rate is significantly higher than the reported Cu-containing TiO 2 , including some Pt and Pd loaded TiO 2 . Optimal Cu content of 9.1 mol% provided maximum active sites and allowed good light penetration in TiO 2 . Over this efficient CuO-TiO 2 , the hydrogen generation rate was accelerated by increasing the methanol concentration according to Freundlich adsorption isotherm. However, the photocatalytic hydrogen generation rate was suppressed under long time irradiation mainly due to accumulation of by-products, reduction of CuO and copper leaching, which requires further investigation.
科研通智能强力驱动
Strongly Powered by AbleSci AI