材料科学
合金
铝
极限抗拉强度
入侵
多孔性
冶金
复合材料
铝合金
拉伸试验
地球化学
地质学
作者
M. Uludağa,Mesut Uyaner,F. Yilmaz,Derya Dışpınar
标识
DOI:10.1515/afe-2015-0093
摘要
Abstract The formation of oxide film on the surface of aluminium melts, i.e. bifilms, are known to be detrimental when they are incorporated into the cast part. These defects causes premature fractures under stress, or aid porosity formation. In this work, Al-12 Si alloy was used to cast a step mould under two conditions: as-received and degassed. In addition, 10 ppi filters were used in the mould in order to prevent bifilm intrusion into the cast part. Reduced pressure test samples were collected for bifilm index measurements. Samples were machined into standard bars for tensile testing. It was found that there was a good agreement with the bifilm index and mechanical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI