Modeling of a compact ultra-wideband bandpass filter with a single notch using DGS and DMS technology

A compact, low loss microstrip ultra-wideband (UWB) bandpass filter (BPF) with a narrow notch band is proposed in this article for using wireless communication applications within the unlicensed UWB range reported by the Federal Communications Commission. A systematic approach is presented to establish the UWB-BPF structure followed by a narrow notch within it. The UWB-BPF response is achieved by integrating a defected structures-based lowpass filter and a short-stepped impedance stub-based highpass filter. The narrow notch band is obtained by embedding two-stepped impedance stubs. The physical dimensions of the stubs can be optimized to select a specific frequency for the notch band. The UWB-BPF structure without the notched band, having a center frequency of 3.69 GHz, provides a fractional bandwidth (FBW) of 157%. The stopband suppression is −26 dB and it is broadened up to 15 GHz. On the other hand, the notched band response is obtained at 5.8 GHz with an FBW of 49.78% which is used for avoiding interference from the wireless local area network. The proposed structures are fabricated and measured for experimental validation.