A series of water retention tests and mercury intrusion porosimetry tests on a clay are performed to investigate the influence of different specimen preparations on water retention behaviour and its pore-size distribution as well as the influence of different isotropic stresses on water retention behaviour. The experimental results show that pre-consolidated specimens exhibit a unimodal pore-size distribution, and unsaturated compacted specimens usually have a double-porosity microstructure, while its microstructure can change due to saturation at the applied pressures of 20 k Pa. Under the same initial void ratio and isotropic stress, the pore sizes of pre-consolidated specimens exhibit a uniform distribution, so they have higher air-entry value than the compacted specimens. Under the same initial void ratio of pre-consolidated specimens, the air-entry value increases with the increasing isotropic stress. Finally, based on the results of the mercury intrusion porosimetry tests, a method for predicting the water retention curve of pre-consolidated and compacted specimens during drying is proposed, and the predicted results are compared with the measured values.