A kind of the materials for the bipolar plate of proton-exchange membrane fuel cells(PEMFC) were fabricated by hot moulding the graphite powders and PF resin powders.Effects of graphite content,curing time and curing temperature on the properties of the composite were studied with orthogonal test.The different effects of graphite content on the properties of composite between single-factor and orthogonal test were also investigated.The results show that the effect of graphite content on the properties of composite is obvious and the effects of curing temperature and time are not.The optimal association of conductivity is A3B5C1 when it is 171.2 s/cm.The optimal association of bending strength is A2B3C2 when it is 62.9 MPa.The bending strength of composite reduces with increasing of the graphite content in single-factor and orthogonal test.The conductivity of composite increases with increasing of graphite in single-factor test,but it increases firstly and then decreases with increasing of the graphite content in orthogonal test.