烧结
材料科学
陶瓷
化学工程
铝酸盐
矿物学
复合材料
水泥
工程类
化学
作者
Tianpeng Wen,Lei Yuan,Endong Jin,Tao Liu,Chen Tian,Jingkun Yu
摘要
Abstract In this work, the CaAl 4 O 7 ceramics and CaAl 12 O 19 ceramics were fabricated by the solid‐state sintering technology and the effects of CeO 2 as the additive on their sintering behavior subjected to sintering at temperatures of 1500°C, 1550°C, and 1600°C were investigated. It was demonstrated that the bulk densities of the CaAl 4 O 7 ceramics and CaAl 12 O 19 ceramics increased about 23.8% and 24.2% after adding 3.0 wt% of CeO 2 than that of the samples without additives. Meanwhile, an increase in lattice parameters occurred in the CaAl 4 O 7 ceramics and CaAl 12 O 19 ceramics. The CeO 2 could form the solid solution in the CaAl 4 O 7 ceramics, inducing the lattice distortion and the activation of the lattice. The Ce 4+ in CeO 2 could be dissolved in the structure of CaAl 12 O 19 phase and result in the structural defects, which would accelerate ion exchange and promote the in situ reaction of synthetic products. These behaviors could promote the sintering process of the CaAl 4 O 7 ceramics and CaAl 12 O 19 ceramics and improve their sinterability. Moreover, a considerable increase in bulk density occurred in both CaAl 4 O 7 ceramics and CaAl 12 O 19 ceramics with increasing sintering temperatures due to the greater densification obtained from the enhanced mass transport at elevated temperatures.
科研通智能强力驱动
Strongly Powered by AbleSci AI