焊接
搅拌摩擦焊
材料科学
航空航天
铝
冶金
铝合金
极限抗拉强度
转速
合金
机械工程
工程类
航空航天工程
作者
Mustufa Haider Abidi,Nabeel Ali,Hashmatullah Ibrahimi,Saquib Anjum,Dhruv Bajaj,Arshad Noor Siddiquee,Mohammed S. Alkahtani,Ateekh Ur Rehman
出处
期刊:Metals
[Multidisciplinary Digital Publishing Institute]
日期:2020-04-18
卷期号:10 (4): 525-525
被引量:25
摘要
The restoration of numerous aircraft structures is achievable with effective repair of welded joints. T-joints are often utilized in these structures to provide structural stability, keeping minimal body weight. Multi-pass friction stir welding (FSW) has proved to be useful for improving the quality of aluminium alloy welds employed in the aerospace sector. However, FSW of these alloys in T-configuration has not been sufficiently addressed yet. Even rarer is the discussion of efficacy of second FSW pass, with altered process parameters for improving the weld quality in T-joints. Hence, two commonly used aerospace grade aluminium alloys, namely, AA2024 and AA7075, were friction stir welded in T-configuration, varying three process parameters, i.e., tool rotational speed, welding speed and shoulder diameter. The effect of second FSW pass, performed at an optimum set of parameters, on kissing bond and tunnelling defect was studied in detail. A substantial reduction in the detrimental effect of these weld defects was discussed via tensile testing, micro-hardness and micro-structural observations.
科研通智能强力驱动
Strongly Powered by AbleSci AI